MemoryToday.com
Memory UpgradeMemory Price ListMemory ForumsAbout MemoryToday

     LINE Chat

     Server HDD
ศูนย์รวม Hard Disk Drive สำหรับ Server รุ่นต่าง ๆ สอบถามได้ทันทีที่ Corporate Center: 02-641-0055

     Server Memory
ศูนย์รวมแรม Server และ Workstation ชนิดต่าง ๆ สอบถามได้ทันทีที่ Corporate Center: 02-641-0055

     Corporate Center
ดีลเลอร์ บริษัท องค์กร และหน่วยงานราชการ สามารถติดต่อโดยตรงไปยังกลุ่มผู้ดูแลลูกค้าพิเศษ เพื่อรับสิทธิพิเศษและเงื่อนไขการชำระเงินได้ที่ Corporate Center: 02-641-0055

     Who's Online
ขณะนี้มี 769 บุคคลทั่วไป และ 0 สมาชิกเข้าชม

ท่านยังไม่ได้ลงทะเบียนเป็นสมาชิก หากท่านต้องการ กรุณาสมัครฟรีได้ที่นี่

     Total Hits
มีผู้เข้าเยี่ยมชม
604254974
คน ตั้งแต่ กันยายน 2547

MemoryToday.com :: ดูกระทู้ - FB-DIMM : Benefits (Simplified board design, Higher memory.)
  คำถามถามบ่อยของกระดานข่าวคำถามถามบ่อยของกระดานข่าว  ค้นหาค้นหา  รายนามสมาชิกรายชื่อสมาชิก   ข้อมูลส่วนตัวข้อมูลส่วนตัว   เข้าระบบเข้าระบบ  เข้าระบบTo be member
FB-DIMM : Benefits (Simplified board design, Higher memory.)

 
ตั้งกระทู้ใหม่   ตอบกระทู้    MemoryToday.com หน้ากระดานข่าวหลัก -> MemoryToday.com : RAM Server : สอบถามราคา โทร.02-641-0055 จัดส่งด่วน
ดูกระทู้ก่อนนี้ :: ดูกระทู้ถัดไป  
ผู้ส่ง ข้อความ
TIM
Site Admin
Site Admin


เข้าร่วมเมื่อ: Oct 03, 2004
ตอบ: 2529

ตอบตอบ: Wed Jan 20, 2010 1:25 pm    ชื่อกระทู้: FB-DIMM : Benefits (Simplified board design, Higher memory.) ตอบกระทู้ด้วยเครื่องหมายคำพูด(quote)

MemoryToday.com :: ผู้ให้บริการเพิ่มแรม อันดับ 1 ของประเทศไทย!! จัดส่งและติดตั้งถึง Office และ EMS โทร. 02-874-4531

Benefits

The benefits of FB-DIMM architecture include
• Simplified board design
• Higher memory capacity
• Higher performance
• Improved reliability

Simplified board design
FB-DIMMs use a 240-pin socket similar to that used for traditional DDR2 registered DIMMs; however, FB-DIMMs require significantly fewer signal traces. FB-DIMMs have 69 signal traces compared to 138 traces for DDR2 registered DIMMs. These traces have to be routed to every DDR2 DIMM on the channel, which complicates board design. FB-DIMMs have additional traces for the secondary links between sockets, but these traces do not add to overall routing complexity.

In addition, the memory controller and AMB can compensate for signal traces of unequal length, thus eliminating the need for odd routing paths to make sure the timing is correct. The lower number of signal traces and the ability to use traces of unequal length greatly simplify board design for FB-DIMMs.

Higher memory capacity
The point-to-point FB-DIMM architecture enables the electrical load (and signal integrity) for each channel to remain constant, even as FB-DIMMs are added. This allows system designers to have up to 8 DIMMs per channel (no rank limits) while maintaining a low soft error rate (Figure 5). In comparison, PC2-3200 SDRAM can have a maximum of 2 dual-rank DIMMs (or 4 single-rank DIMMs) per channel

Higher performance
The asynchronous serial links between the memory controller and AMB enable higher performance by the memory subsystem. The two devices operate on independent clocks, so the transmitting device embeds a bit clock with the data stream. The bit clock consists of a start bit that indicates the beginning of a chunk of information, or data word, and a stop bit that indicates the end of the data word. This eliminates skew between the clock and the data—an issue with parallel interfaces—and allows very high data rates to be achieved.

As described previously, the outbound links exhibit one-half the peak theoretical throughput of the inbound links. For FB-DIMMS with DDR2-533 DRAM devices, the outbound links have a theoretical throughput of 2.1 GB/sec, or approximately one-half of 4.3-GB/s inbound links (Figure 6). Because the serial links transport write and read data simultaneously, the total theoretical throughput of the FB-DIMM channel is 6.4 GB/s (2.1 GB/s plus 4.3 GB/s). When using DDR2-667 DRAM, the total theoretical throughput of the FB-DIMM channel is 8.0 GB/s (2.7 GB/s plus 5.3 GB/s)

Improved reliability
FB-DIMM technology improves reliability through extended use of ECC and the introduction of a new fail-over mechanism. FB-DIMMs extend the use of ECC to protect commands and address information in the event of a soft error. This feature can help reduce instances where the soft error could disrupt server performance and reliability. A second data protection mechanism called “bit lane fail-over” correction identifies a bad data path and removes it from service.



Information provided by Hewlett-Packard Development Company, L.P.



Figure 5. The FB-DIMM architecture allows up to 8 FB-DIMM sockets per channel..jpg
 คำจำกัดความ:
Figure 5. The FB-DIMM architecture allows up to 8 FB-DIMM sockets per channel.
 ขนาดไฟล์:  39.64 กิโลไบต์
 เข้าชม:  9743 ครั้ง

Figure 5. The FB-DIMM architecture allows up to 8 FB-DIMM sockets per channel..jpg



Figure 6. Theoretical throughput of the FB-DIMM channel.jpg
 คำจำกัดความ:
Figure 6. Theoretical throughput of the FB-DIMM channel
 ขนาดไฟล์:  44.95 กิโลไบต์
 เข้าชม:  9743 ครั้ง

Figure 6. Theoretical throughput of the FB-DIMM channel.jpg



_________________
MemoryToday.com โทร.02-641-0055 / 084-959-9000
Update ราคาล่าสุด! สอบถาม/ขอใบเสนอราคา โทรมาหาเราสิครับ!

กลับไปข้างบน
แสดงข้อมูลส่วนตัวของสมาชิก เข้าชมเว็บไซต์
แสดงการตอบก่อนนี้:   
ตั้งกระทู้ใหม่   ตอบกระทู้    MemoryToday.com หน้ากระดานข่าวหลัก -> MemoryToday.com : RAM Server : สอบถามราคา โทร.02-641-0055 จัดส่งด่วน ปรับเวลา GMT + 7 ชั่วโมง
หน้า 1 จากทั้งหมด 1

 
ไปยัง:  
คุณ ไม่สามารถ ตั้งกระทู้ใหม่ในกระดานนี้
คุณ ไม่สามารถ ตอบกระทู้ในกระดานนี้
คุณ ไม่สามารถ แก้ไขการตอบกระทู้ของคุณในกระดานนี้
คุณ ไม่สามารถ ลบการตอบกระทู้ของคุณในกระดานนี้
คุณ ไม่สามารถ ลงคะแนนในแบบสำรวจในกระดานนี้
คุณ สามารถ แนบไฟล์ในกระดานข่าวนี้
คุณ สามารถ ดาวน์โหลดไฟล์ในกระดานข่าวนี้





ผู้จำหน่าย RAM, SSD, HDD & Upgrade Parts สำหรับ Server อันดับ 1 ของประเทศไทย !!
RAM and SSD -> Server, Workstation, Apple Mac, Notebook, Desktop PC : Server Options -> Processor, Memory, SAS HDD, Storage Controller, Power Supply, Spare Part
© 2004-2023 MemoryToday.com, All rights reserved.
MemoryToday Co., Ltd. 7 IT-Mall Fortune Town Bldg., 3rd Floor, Room 3R22, Ratchadapisek Rd., Dindaeng, Bangkok 10400 Tel: 02-641-0055 Fax: 02-641-0066
Web site engine's code is Copyright by PHP-Nuke. All Rights Reserved. PHP-Nuke is Free Software released under the GNU/GPL license.